If you have noticed that there are already tiles in your home that are coming loose, the best thing that you can do about this is to repair is sooner than later as this will enable you to save some amount yourself. Furthermore, we want you to know as well that letting tiles that are coming loose as is and not fixing it is not advisable as there are lots of dangers that comes alongside it, most especially when it comes of and break as the shards may trip us and cause us to suffer from injuries. There are quite a number of options that you have when it comes to your tile coming loose that are much better than anything else and we will be presenting them all to you here in this article.
As what we have mentioned above, there are lots of ways on how you can handle tiles that are coming loose like pulling them all up and replacing them all. However, there are also issues that will come out from choosing to go for tile replacement such as that it can be pretty expensive and messy and will more likely be time consuming as well. When the problem that you have only deals with several pieces of tiles that are coming loose, replacement is not necessary to be taken as this can be fixed by tile repair alone.
Once you have decided to opt for tile repair instead of tile replacement, please be reminded that there are few essential things that you need to consider such as the importance of cleaning the tiles first by means of using a household cleaner. If you have already cleaned the tiles and make it as spotless as you can, what you should do next is to put the special ceramic glue onto the areas where the cracks are present. After placing the special ceramic glue to the damaged area, you can use a knife to force the damaged tile to stick to the floor, not to mention that you can also use it to smoothen the damaged area too. And of course, you must not move it or do any unnecessary movements that will misplace the damaged tile instead, you have to let the glue work for twenty four hours.
If you see that the glue has already dried up, the next thing that you should do is to sand them down using sandpaper. When you sand the dried glue down, you are not only smoothing the texture of the floor, you are also achieving a flat area as well. You should not be rough when sanding the dried glue, instead, you have to be quick and be light at the same time.