A Guide to Wood Science

The Biological research of wood and it’s renewable material is what is referred to as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. Materials properties, ease of it being worked on and its value are among the few properties which are compared against those of wood and other materials. Wood has many advantages and this technology takes the advantages and utilizes them. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. It is also based on renewable resources. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.

Protection of wooden structure and products is a must if you want to keep the good looks in place. This protection is from moisture and insects which are the biggest threat to wood. The water particles in the timber increase the rotting and the insects bore through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. As the name implies the preservative is made of copper products. There are a few disadvantages of this method as a mode of wood preservation. It has been seen corroding most metals for example aluminum in less than six months of its application. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

The use of copper metal is another method of wood treatment that is fast being accepted. This method is being accepted fast because is friendly to wooden fasteners. This process is what in other words called the micronized copper wood preservative. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. The characteristics of the wood are highly improved and the when this process is used to treat wood. The time the wood products treated using this method last is longer other types of treatment.

The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. Extensive research over a period of 10 years has proven the effectiveness of this science as one of the best wood preservation methods.

More ideas: http://toddshupelsu.com/